LxOEM Lighting Controller

OEMCtrl's LxOEM lighting controller uses two advanced microprocessors to provide superior lighting control, while delivering the rapid response required by lighting applications. Each LxOEM controller has 24 switch inputs for low voltage devices, 6 analog inputs for photocells, and a port for a digital network of switches. Up to 3 Lighting Input Expansion Boards (LEXPs) can be used in conjunction with an LxOEM in order to increase the switch inputs to a total of 120. Designed to be used in conjunction with Relay Interface Boards (RIBs) the LxOEM can drive up to 64 2-wire, 3-pin, 3-wire, or 5-wire SPST latchign relays.

 


 

BACnet

Vendor Name: OEMCtrl
Product Name: LxOEM
Product Model Number: LxOEM
Applications Software Version: Firmware Revision: 4.02

BACnet Protocol Revision: v9.0
BACnet Advanced Application Controller (B-AAC)

Built-in, DIP switch selectable protocol support: BACnet (ARC156 and MS/TP)

Supports up to 2,000 BACnet objects, depending on available memory

Supports BACnet discovery and configuration

 

I/O Zone 560

Protocol

Transport Layer

Baud Rate

Dip Switch Position

MS/TP

78.6 kbps

MS/TP

38.4 kbps

MS/TP

19.2 kbps

MS/TP

9.6 kbps

ARC156

156 kbps

       

Key Features

• I/O point count:

24 switch inputs for low voltage devices such as switches and occupancy sensors

Expandable to 120 inputs with optional LEXP input expanders

6 analog inputs for 0–5 Vdc photocells, 10 bit A/D resolution

• Supports discovery and configuration by OEMCtrl's FieldAssistant

• Custom-programmable using our powerful Eikon®LogicBuilder graphic programming tool, enabling OEM manufacturers to create graphic logic sequences supporting up to 70 contol programs
• Stand-Alone or BAS integrated operational modes
• On-board battery-backed (720 hours) real-time clock, with standard (replacable) lithium battery: CR2032 3V

Digi-Touch Network Port for digital switchs

• LxOEM can drive up to 64 relays (with Relay Interface Boards ) 2-wire, 3-pin, 3-wire, or 5-wire latching relays

• Auxiliary power terminal can supply 24 Vac, full-wave rectified power to other full-wave devices

 

Related Documents

 

Accessories

 

Relay Interface Boards

 

The LxOEM is designed to be used in conjunction up to four Relay Interface Boards (RIBs).

If all four RIBs are used, LxOEM can drive up to 64 2-wire, 3-pin, 3-wire, or 5-wire relays.

 

Relay Style Relay Interface Board Relay Type Relay Brands   Relay Models
2-wire

LRB27-A - Relay Interface Boards with (16) outputs

LRB27-B - Relay Interface Boards with (16) outputs

 

Wiring Detail

Latching relays rated for 20A branch circuits and 120/277/347V 

Douglas

Matsushita

Panasonic

Aromat

Panasonic 2-wire relay

WR-6221

WR-6161

WR-6162

WR-6172

ILC 2PC
3-pin

LRB35-A - Relay Interface Boards with (16) outputs

LRB35-B - Relay Interface Boards with (16) outputs

 

Wiring Detail

Latching relays rated for 20A branch circuits and 120/277/347V, with manual override. Gruner Gruner 3-Pin Relay 704QL
3-wire

LRB-A - Relay Interface Boards with (16) outputs

LRB-B - Relay Interface Boards with (16) outputs

 

Wiring Detail

Latching relays rated for 20A branch circuits and 120/277/347V 

General Electric

Horton Controls

WattStopper

Lithonia Lighting

RR7
ILC 2R7
5-wire

LRB26-A - Relay Interface Boards with (16) outputs

LRB26-B - Relay Interface Boards with (16) outputs

 

Wiring Detail

Latching relays rated for 20A branch circuits and 120/277/347V, with feedback

General Electric

Horton Controls

Lithonia Lighting

RR9
ILC 2R9
WattStopper HDR

 

LEXP

Used to expand the input capacity of your lighting control panel. Up to three LEXPs can be used in conjunction with an LxOEM lighting controller.

   
Switch Inputs 32 digital inputs for low-voltage switches and occupancy sensors
Power

Power from the LxOEM is protected by a non-replaceable internal solid-state polyswitch that resets

when the condition that causes a fault returns to normal. Switch inputs are protected against

voltage transient and surge events.

Environmental operating range

32 to 125°F (0 to 52°C)

20-95% relative humidity, non-condensing

Dimensions

Width: 4.44 in. (11.27 cm)

Height: 4 in. (10.16 cm)

Product Detail LEXP
   

Digi-Touch Digital Addressable Switches

 

OEMCtrl's Digi-Touch switches used in conjunction with the LxOEM lighting controller dramatically reduces installation and wiring costs of field input devices, while increasing functionality of lighting switches. The Digi-Touch Network allows
addressable Digi-Touch wall switches.


• Industry standard Decora® style
• Increased switching options for more flexible local control
• Removable clear cap allows for labeling
• Two-color LED indicates switch status
• Removable terminal blocks simplify installation
• Dip switch settings allow unique addressing for each device
• Reduced installation costs with common network

 

Learn More

 

 

Low Voltage Switches

 

OEMCtrl's low voltage switch that registers a solid, audible click when pressed. Part# LVS


• Each switch and frame is made to fit in a single gang
• Made for Decora style wall plates (not included)